Has the discussion been brought up that there is a reset function accessible using the front panel menu?
-----Original Message-----
From: Sherrod Munday [mailto:Sherrod.Munday@SkyAngel.com]
Sent: Tuesday, December 05, 2006 15:38
To: CRTech
Subject: RE: [CRTech] CRB changes and U4K reboots
On Tuesday, December 05, 2006 4:10 PM, Marvin Glass wrote:
>
> Well, I haven't been able to reboot remotely and I have
> silence on that channel and music playing instead of Dave Ramsey.
1. Do you have a computer tied to the serial port of that receiver?
2. Do you have remote access (e.g. PCAnywhere, VNC, etc.) to that computer?
If the answer to both questions is yes, then you should be able to remotely reboot it by getting on that computer and running Hyperterminal or SatSked (if you are using that program already) and typing the "reset" command in to the receiver.
That's the *simple* overview: there are obviously lots of details omitted for the same of brevity. If you do have remote connectivity to a computer tied to the receiver, there are plenty of folks on this list that can help guide you through the particulars of exactly how to do it (once we have the details of your setup).
--
Sherrod Munday
<sherrod.munday@skyangel.com>
(423) 303-7026
---------------------------------------------------------------------
For CRTech resources visit http://CRTech.org/
To unsubscribe, e-mail: crtech-unsubscribe@crtech.org
List problems? E-mail: TechStaff@CRTech.org
|