RE: [CRTech] CRB changes and U4K reboots

[Bill Hurne <bill.hurne@moody.edu>]

Title: Message

To reboot the U4K, send "reset" without the quotes to the same serial port that receives the network change commands.  That is "reset" rather than "setaudio 2 s ...."

 

Bill Hurne

 

 

> How can I reboot 
>   remotely?  (I can send signals via SatSked while remotely logged into my 
>   station computer.)  I won't be physically at my station till the 
>   weekend.
>
> At 11:52 AM 12/04/2006, you wrote:
>
> > Can someone from CRB (if you are 
> >     on this list) or the CRC in general chime in here on this one?  I never 
> >     recall having to reboot a U4K to pick up a new channel.
> >
> > Is this the 
> >     case because they are a non-CRC member?  Is the receiver reboot a 
> >     COMPEL command they cannot do?
> >
> > -Peter
> >
> > > On Tuesday December 5th at 6:00 
> > >       AM we are changing our 3 letter identifiers
> > > on the Unity 4000 
> > >       receiver.  Routes will remain the same.  The only 
> > >       thing
> > > changing with be the identifier.  You will need to reboot 
> > >       the receiver to
> > > find them.  I am told if you don't reboot you will 
> > >       not be able to receive
> > > our audio.  The changes are as 
> > >       follows.
> > >
> > > CRB will become CB1
> > > AL1 will become CB2
> > >
> > > Let me 
> > >       know if you have any questions.  Thanks.
> > >
> > > Graham 
> > >       Parker
> > > Operations Manager, CRB Satellite Network
> > > Operations Manager, 
> > >       WSNL
> > > 810-694-4146
> >
> >
> >
> > ---------------------------------------------------------------------
> > For 
> >     CRTech resources visit http://CRTech.org/
> > To unsubscribe, e-mail: 
> >     crtech-unsubscribe@crtech.org
> > List problems?  E-mail: 
> >     TechStaff@CRTech.org
> >
> >
> >
> >
> >
> > -- 
> > No virus found in this 
> >     incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.409 / 
> >     Virus Database: 268.15.6/568 - Release Date: 
> > 12/04/2006